North West Fuel and
Energy Solutions, Inc.
www.NorthWestFuelEnergySolutions.com
|
|
DISTRIBUTOR
Clean Boost Fuel Products
|
|
360-649-5348 (cell)
|
ITEM |
DESCRIPTION |
PRICING |
|
70W Racing Oil |
CleanBoost 70W Racing Oil™ is
specifically blended for nitro-methane and methanol fuel burning engine
applications. Using Z-Alt™ Infused Moly™-based technology, and contains no
Solvents, Plastics, Graphites, Borons, Teflons or Chlorines. CleanBoost 70w
is engineered to improve initial start-up wear protection and reduce friction
providing improved efficiency for 1,000 to 8,000 horse power engines. Visual
inspection and oil analysis has proven, when using CleanBoost Oil, reduced
piston skirt, cylinder wear and bearing deformation are achieved and
component life can be extended longer. Reduced oxidation on the oil will also
allow for longer engine and component life, particularly when cylinder
wash-down occurs. |
Call for
Pricing |
|
Anti-Microbe
Treatment |
The effectiveness of Clean Boost
Anti-Microbe in killing and inhibiting microbial growth is determined
somewhat by the rate of prolific growth. Clean Boost Anti-Microbe is
formulated such that once a growth problem is brought under control a
concentration level of about .018 grams per gallon of treated fuel is
maintained. This is high enough to inhibit further microbial growth even for
the organisms that are hardest to kill. The most effective time to treat a
fuel and prevent prolific growth is upon addition of fresh fuel to the
storage tank. The quicker kill time and greater resistance to hydrolysis
allow Clean Boost Anti-Microbe to attack and kill a wide range of microbial
growth. Treat ratio is 1:10,000 (1-gallon of Clean Boost Anti-Microbe to
10,000 of # 2 Diesel or Bio-Diesel) |
1 gallon bottle = $234.00 Case = $780.00 (4 – 1
gallon bottles) |
|
Filtakleen |
Filtakleen filters have been
proven to work in extending oil drain intervals up to 5 times longer and
allows the oil to stay clean during this extended time. Oil Analysis has
proven Filtakleen filters to be one of the best on the market today. We have
fleets on the east-coast extending their oil change intervals up to
100,000 miles and keeping their equipment healthly and running
longer. Proven test have shown that the Filtakleen filter can also
increase fuel mileage up to 3% in most cases. Keeping your oil clean from
contaminants and soot will allow your engine to runs longer as the oil
stays cleaner longer. |
Unit = $775.00 Replacement Cartridge = $49.95 |
|
Clean Boost Maxx |
Clean Boost Maxx used with # 1, #
2 diesel or gasoline at a ratio of 1:4000 dramatically reduces the carbon
particulate emissions while simultaneously reducing the excess air
requirements. Clean Boost Maxx promotes the combustion of the carbon
particles (soot) and condensed tar which result from the incomplete
combustion of fuels. Reduced soot means cleaner air quality and cleaner
running equipment with increased fuel economy. EPA registered and able to be
used in off-road and on-road applications. |
32 oz bottle = $38.50 Case = $138.50 (4 - 32 oz
bottles) 1 gallon bottle = $137.00 Case = $493.20 (4 - 1
gallon bottles) |
|
Cold Flow |
Clean
Boost Cold Flow is a unique blend of EVA copolymers formulated to lower the
cold filter plug point of harder to treat diesel fuels. When winter hits, you
may not have the time to thaw your equipment fuel lines and change out fuel
filters. To prevent gelling or the formation of crystals, Clean Boost Cold
Flow has been specially formulated to provide maximum flow/pouring
capabilities in diesel and biodiesel fuels. To ensure satisfactory cold
weather performance Clean Boost Cold Flow is capable of preventing gelling of
#2 diesel fuels as low as -40 degrees F. Note: treat rations vary from
1:20,000 to 1:3,000 depending on your location temperature. |
32 oz bottle = $27.95 Case = $100.00 (4 - 32 oz bottles) |
|
Diesel Duty |
CleanBoost Diesel Duty 15w40 Motor Oil is
a premium heavy duty diesel engine oil
designed to
meet the warranty requirements of
most manufacturers of
diesel engines equipped with EGR
valves and was
specifically developed for diesel engines operating on ULSD
fuels. Protecting the
metal/sliding components gives your
equipment the
assurance it
needs to perform at top efficiency. |
5 gallon bottle = $171.00 |
|
Diesel Fuel Treatment |
CleanBoost Diesel Fuel advanced
formula additive is specifically developed to accelerate the combustion rate
of hard-to-burn hydrocarbon molecules. It functions by promoting the
decompression of the large fuel particles in the flame and thus produces
smaller fragments. This virtually eliminates opacity (black smoke) problems.
Slagging, fouling and corrosion are also less likely, thereby extending
equipment life. Clean Boost diesel fuel additive has been tested for
increased lubricity in ULSD fuels. ASTM D-6079 shows a large reduction in
friction over diesel alone, which will increase the life of fuel system
components and engine life. |
5 gallon bottle = $475.00 |
|
Fuel Pills |
Clean Boost Fuel Pills will
dramatically reduce the carbon particulate emissions while giving the fuel a
chance to burn more complete in the combustion chamber. EPA Registered and
able to be used in diesel and gasoline. |
50 count bottle = $46.00 |
|
Mettle Plus (Clean Boost EMT) |
Mettle
Plus aka 'Clean Boost EMT' (Engine Metal Treatment) was designed to help
protect engines, manual transmissions, gear boxes, differentials and more,
from high temperatures, acid build up and wear. Mettle Plus's technology can
be used as a pour-in additive to help protect your engine. Mettle Plus is
used by top drag racing teams in the Full Throttle Series as well as IHRA Top
Sportsman class and No-Box ET drivers throughout the USA and Canada. Download Mettle Plus-Clean Boost EMT PDF |
8 oz bottle = $15.00 Case = $160.00 (12 - 8 oz bottles) 16 oz bottle = $23.00 Case = $249.00 (12 - 16 oz bottles) 64 oz bottle = $66.50 Case = $359.10 (6 - 64 oz bottles) 5 gallon bottle = $510.00 |
|
Mettle Plus Grease |
Mettle
Plus EP Grease is superior lithium complex grease designed to provide
excellent lubricating qualities over a wide range of temperatures. It is
designed to work under the toughest conditions with excellent mechanical and
chemical stability. Mettle Plus EP Grease is designed to “always stay in
place” under the worst operating conditions of water-dirt-mud, providing you
with maximum protection and peace of mind. It is formulated with 5% of our
specialized metal treatment additive for protection against sliding friction
wear. |
14 oz tube = $10.40 Case = $93.60 (10 - 14 oz tubes) |
|
Nano Spray |
Clean
Boost Nano-Spray is easy to use and contains no harmful materials, is great
for many uses in the shop and around the home. Clean Boost Nano-Spray will
help protect metal surfaces as well as penetrate rust, dirt and grime. Help
lubricate bushings, springs, hinges, slides and more. Great to use when
drilling metal, helps reduce drill bit wear and speeds up your drilling jobs. |
16 oz spray bottle = $11.95 Case = $128.55 (12 - 16 oz spray bottles) |
|
Nano-Sheen |
CleanBoost
NanoSheen is easy to use and requires no buckets, no hoses, no rinsing and no
drying. Simply spray on and wipe dry. With CleanBoost NanoSheen you can
conveniently and quickly wash your vehicle/equipment anywhere, anytime
without having to find a carwash or the use of water and soap. The unique
formulation dissolves dirt and stains. Special lubricating agents encapsulate
the dirt so that it can easily be wiped off a delicate vehicle surface
without scratching. It also leaves a protective film that provides gloss,
color enhancement and smoothness. |
16 oz spray bottle = $8.50 Case = $91.80 (12 - 16 oz spray bottles) |
|
Combust Filters |
Using WaterGuard technology,
Combust Filters offers a new filtration technology that has been granted U.S.
Patent # 7,425,266-B2. This new filter
chemistry allows Combust Filters to remove liquid water and emulsified water
from Hydraulic and Lubricating oil systems even if the oil has a high acid
number or the fuel contains E-85 levels of alcohol. Which is something no other filter is
reported able to do. This new Patented
Filter represents advancements in chemistry that allows Combust Filters to
remove even the emulsified water and acids that forms in industrial oils, and
in doing so can restore contaminated oils back to a like new oil condition
while the oil remains in service.
Combust Filter’s 4” x 5” spin-on filters can remove 12-ounces of water
and our 7”x 18” cartridge filter can remove one-gallon of water, and on
reaching their holding capacity, these new filters will slow their flow to
causes an increase in the pressure gage reading, which alerts the operator
that it is time to change the filter.
|
5" Spin On Filter Diesel = $36.95 9" Spin On Filter Diesel = $40.95 5" Fuel Filter Marine = $36.95 9" Fuel Filter for Marine = $40.95 Adaptor Bushing = $13.00 Adaptor
Sizes: 1"x12 1"x14 7/8
x 14 3/4
x 16 |